MIC2077-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 150mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2077 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 μs |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| Height | 1.64mm |
| Length | 10mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2077-1YM Overview
It's?packaged?in?the way?of?a?Tube.It is included with the 16-SOIC (0.154, 3.90mm Width) package as well.Surface Mount is the mounting type of the LED driver.A USB Switch switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 4 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Slew Rate Controlled, Status Flag.As you can see, it comes from the MIC2077 family.16 pins are used for operation.From the lighting driver, there is a maximum output of 500mAV.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 150mOhm.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.A maximum operating temperature of 85°C°C is required for stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It can also be used at 2.7Vvolts if needed.
MIC2077-1YM Features
Resistance of 150mOhm
MIC2077-1YM Applications
There are a lot of Microchip Technology MIC2077-1YM Power Switches ICs applications.
- Wireless Headsets
- Hard Disk Drives
- Portable Music Players
- Hot Swaps
- Hot Swap
- USB Power Distribution
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Telecom and Network Systems
- Wearable Devices
