MIC2077-2YWM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 150mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2077 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2077-2YWM Overview
Tube is the way it's packaged.It is included in the package 16-SOIC (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.The switch type of this switch is USB Switch.Ensure reliable operation by setting the temperature to -40°C~85°C TA.As a default, the output is set to 4.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.The MIC2077 family consists of this type.The 16 pins are used for the operation of the system.There is a maximum output of 500mAV from the LED driver.The maximum output current drops to 500mA in order to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.There is 150mOhm resistance on the LED driver.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.If required, it can operate at 2.7V volts as well.
MIC2077-2YWM Features
Resistance of 150mOhm
MIC2077-2YWM Applications
There are a lot of Microchip Technology MIC2077-2YWM Power Switches ICs applications.
- Solid-State Drives
- Solid State Drivers
- Portable GPS Device
- Storage Drives
- PDAs
- Portable GPS
- Notebook and Tablet Computers
- Set-Top Boxes
- Handheld Devices
- Wireless Headsets
