MIC2090-1YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 700mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 100mA |
| Base Part Number | MIC2090 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 50mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Current - Output (Max) | 50mA |
| Nominal Supply Current | 110μA |
| Current | 50mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 215 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 125 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 700mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2090-1YM5-TR Overview
The package is in the form of a Tape & Reel (TR).This package is included in SC-74A, SOT-753.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.The MIC2090 family contains this object.During operation, the 5 pins are used.50mAV is the maximum output of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 50mA.Surface Mount is mounted in the way.Currently, the LED driving board has 700mOhm resistance.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.To ensure reliability, it should operate at -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.It can operate at low supply voltages, such as 1.8V volts.
MIC2090-1YM5-TR Features
Resistance of 700mOhm
MIC2090-1YM5-TR Applications
There are a lot of Microchip Technology MIC2090-1YM5-TR Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- Wireless Modem Data Cards
- USB Power Distribution
- USB Ports/Hubs
- USB3.1 Power Delivery
- HDD, SSD
- Solid-State Drives
- PDAs
- PC Cards
