MIC2090-2YM5-TR
| Parameters | |
|---|---|
| Turn-Off Delay Time | 125 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 700mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.2Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2090 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 50mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Current - Output (Max) | 50mA |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 215 ms |
| Switch Type | General Purpose |
MIC2090-2YM5-TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package SC-74A, SOT-753.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.I believe it belongs to the MIC2090 family.In terms of output, the lighting driver can provide a maximum of 50mA V.To comply with the operation criteria, the maximum output current is reduced to 50mA.There is 1.2Ohm resistance on the LED driver.It is suitable for stable operation to operate at a maximum temperature of 125°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.It can also be used at 1.8Vvolts if needed.
MIC2090-2YM5-TR Features
Resistance of 1.2Ohm
MIC2090-2YM5-TR Applications
There are a lot of Microchip Technology MIC2090-2YM5-TR Power Switches ICs applications.
- Portable Music Players
- Hot Swap
- USB Ports/Hubs
- Low Voltage I/O System Power
- Hot Swap
- Set-top-box
- Smartphone and PDA
- Hard Disk Drives
- Set-Top Boxes
- PC Card Hot Swap
