MIC2091-1YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 700mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 100mA |
| Base Part Number | MIC2091 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Current - Output (Max) | 100mA |
| Nominal Supply Current | 110μA |
| Current | 100mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 215 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 125 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 700mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2091-1YM5-TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The SC-74A, SOT-753 package contains it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is P-Channel volts.It is equipped with Status Flag features.It belongs to the MIC2091 family.The 5 pins are used for the operation of the system.The maximum output of the LED driving board is 100mAV.In order to meet the operation criteria, the maximum output current drops to 100mA.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 700mOhm resistance.To choose from, there are 1 channels.The maximum operating temperature of 85°C°C allows for stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.It can operate at 1.8V volts as well.
MIC2091-1YM5-TR Features
Resistance of 700mOhm
1 channels
MIC2091-1YM5-TR Applications
There are a lot of Microchip Technology MIC2091-1YM5-TR Power Switches ICs applications.
- USB Protection
- USB Ports/Hubs
- Set-Top Boxes
- Solid-State Drives
- Mobile Communication Devices
- USB Power Distribution
- Gaming
- PC Card Hot Swap
- Portable Devices
- PC Cards
