MIC2097-1YMT-TR
| Parameters | |
|---|---|
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 1.1A |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 700 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 170mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Supplier Device Package | 6-TMLF® (1.6x1.6) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 170mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2097 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.1A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
MIC2097-1YMT-TR Overview
Tape & Reel (TR) is how it's packaged.In the 6-UFDFN Exposed Pad package, it is included.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.Slew Rate Controlled features are available on the lighting driver.It belongs to the family MIC2097.The operation is carried out using the 6 pins.There is a maximum output of 1.1AV from the LED driver.Maximum output current falls to 1.1A when operation criteria are met.In this case, it is mounted in the way of Surface Mount.In this case, there is 170mOhm resistance in the LED driving board.Keeping the operating temperature at 85°C°C ensures stable operation.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.As a result, it is only capable of handling voltages up to 5.5VV.It can also be used at 2.5Vvolts if needed.
MIC2097-1YMT-TR Features
Resistance of 170mOhm
MIC2097-1YMT-TR Applications
There are a lot of Microchip Technology MIC2097-1YMT-TR Power Switches ICs applications.
- USB Ports/Hubs
- Portable/Handheld Devices
- PC Card Hot Swap
- USB Protection
- HDD and SSD
- Hot Swap
- Hot Swaps
- PDAs
- USB Power Distribution
- Wearable Devices
