MIC2124YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Hyper Speed Control® |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE DOWN TO 0.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2124 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~18V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 91 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MIC2124YMM-TR Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 3V~18V. Suitable for a -40°C~85°C TA dc switcher. The switching controller can be switched at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 10 terminations. The nominal DC switcher's voltage input is 5V. MIC2124 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 10 pins. dc dc voltage regulators should have a minimum input voltage of 3V. Statistically, the DC regulator outputs 800mV voltage. You should note down the dc dc regulator's usual output current of 25A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 91 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator has a maximum frequency of 360kHz. This value is ALSO OPERATES IN ADJUSTABLE DOWN TO 0.8V so that DC to DC voltage regulator better serves the purpose. Hyper Speed Control? series dc to dc voltage regulator belong to this series.
MIC2124YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
Max Duty Cycle: 91 %
ALSO OPERATES IN ADJUSTABLE DOWN TO 0.8V
MIC2124YMM-TR Applications
There are a lot of Microchip Technology MIC2124YMM-TR DC to DC converter applications.
- Large fire protection systems
- Pipe bending machines
- SMT equipment
- Emergency lighting monitoring equipment
- USB circuits
- Precision electronic equipment
- Mobile phones
- Terrestrial set-top boxes
- Program control systems
- Radio equipment
