MIC2130-1YTSE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-eTSSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 150kHz |
| Base Part Number | MIC2130 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 34V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 8V |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Topology | Buck |
| Frequency - Switching | 150kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 170kHz |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2130-1YTSE Overview
With its 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 8V~40V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A switching controller such as this can switch at a value of 150kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Power Good, Soft Start is included in the dcdc regulator. You can find other relevant dc to dc converter ics by searching "MIC2130". 16 pins are present on switching converter. Statistically, the DC regulator outputs 34V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 10A. The duty cycle of the voltage regulator dc to dc can be set to 92 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator has a maximum frequency of 170kHz. Switching controller operates at 150kHz Hz. The temperature should be at least -40°C. A temperature of 125°C more than 125°C degrees Celsius should be maintained in the undc regulator. It would be 16-eTSSOP for this part's supplier dc dc controller package. This controller switches with 1 phases. In terms of maximum supply voltage, switching voltage regulators is rated 40V.
MIC2130-1YTSE Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 92 %
Frequency: 150kHz
MIC2130-1YTSE Applications
There are a lot of Microchip Technology MIC2130-1YTSE DC to DC converter applications.
- Window air conditioners
- Medical monitoring systems
- Analog precision reference circuits
- Nuclear power plants
- Textile machinery
- seismic instrument power circuits
- Elevator lighting
- Imported equipment
- Special machining machine tools
- Network technology
