MIC2131-4YTSE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-eTSSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2131 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Supply Voltage | 40V |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Topology | Buck |
| Frequency - Switching | 400kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 440kHz |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2131-4YTSE Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 8V~40V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. The switching controller can be switched at 400kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Power Good, Soft Start for efficient switching control. Search for "MIC2131" to find other relevant dc to dc converter ics. Switching converter has a total of 16 pins. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator's maximum frequency is 440kHz. DC regulator should be kept at a temperature of -40°C or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. This part's supplier dc dc controller package would be 16-eTSSOP. There are 1 phases in this controller. Voltage maximum is rated 40V.
MIC2131-4YTSE Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 80 %
MIC2131-4YTSE Applications
There are a lot of Microchip Technology MIC2131-4YTSE DC to DC converter applications.
- Solar power plants
- Boring machines
- Precision electronic equipment
- Terrestrial set-top boxes
- Bending machines
- Handheld GPS
- Digital video recorders
- Hydraulic presses
- Post equipment
- Adjustable voltage or current linear circuits
