MIC2164-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2164 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Operating Supply Current | 1.4mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Max Supply Current | 3mA |
| Control Features | Enable |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 5.5V |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Max Duty Cycle | 74 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 74% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 920μm |
| Length | 3mm |
| Width | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2164-2YMM Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tube rating. The program can handle Transistor Driver dc switching's outputs (s). Voltages 3V~28V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 600kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. Other relevant dc to dc converter ics can be found by searching "MIC2164". Pins number 10 of switching converter in total. The test statistics indicate that DC regulator outputs a voltage of 5.5V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. The maximum duty cycle of this voltage regulator dc to dc is set to 74 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 750kHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 28V to the voltage regulator dc to dc. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 125°C degrees Celsius. A dc to dc voltage regulator in the Hyper Speed Control? series, it belongs to this family. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. Its supplier dc dc controller package is 10-MSOP. In order to use a 3V voltage supply, switching controller is necessary to have one. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. The supply current of the voltage controller is 1.4mA. This controller switches with 1 phases. If the current exceeds 3mA, the component may not operate correctly and may even be damaged.
MIC2164-2YMM Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
Max Duty Cycle: 74 %
MIC2164-2YMM Applications
There are a lot of Microchip Technology MIC2164-2YMM DC to DC converter applications.
- Communication system
- Imported equipment
- Various precision measuring detectors
- Digital precision reference circuits
- Terrestrial set-top boxes
- Post equipment
- Automatic testing equipment
- Laboratories
- Wind power
- Constant current circuits
