MIC2164-3YMM
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2164 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Operating Supply Current | 1.4mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Max Supply Current | 3mA |
| Control Features | Enable |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 5.5V |
| Synchronous Rectifier | Yes |
| Max Frequency | 1.25MHz |
| Max Duty Cycle | 33 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 66% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 920μm |
| Length | 3mm |
| Width | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
MIC2164-3YMM Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). 3V~28V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 1MHz with this switching controller. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Enable. You can find other relevant dc to dc converter ics by searching "MIC2164". 10 pins are present on switching converter. DC regulator outputs 5.5V voltage based on test statistics. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. voltage regulator dc to dcs with a 33 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator's maximum frequency is 1.25MHz. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. A temperature of -40°C or higher is recommended. There should be 125°C more than 125°C degrees Celsius in the machine. Basically, it's a dc to dc voltage regulator from the Hyper Speed Control? series. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. There would be 10-MSOP supplier dc dc controller package for this part. 3V is the required supply voltage. At its maximum output, the switching converter can provide 5.5V volts. With a current supply of 1.4mA, it runs. This controller switches with 1 phases. In the presence of a current greater than 3mA, the component may fail to operate properly and may be damaged.
MIC2164-3YMM Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
Max Duty Cycle: 33 %
MIC2164-3YMM Applications
There are a lot of Microchip Technology MIC2164-3YMM DC to DC converter applications.
- Product testing
- Adjustable voltage or current linear circuits
- Computer application technology
- Window air conditioners
- Computer rooms
- Fire elevators
- Telecommunications equipment
- Gear/thread machining machines
- Experimental setup
- Cutting machine tools
