MIC2164CYMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2164 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Max Supply Current | 3mA |
| Control Features | Enable |
| Topology | Buck |
| Frequency - Switching | 270kHz |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 87 % |
| Duty Cycle (Max) | 87% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2164CYMM Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 3V~28V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 270kHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable. Other relevant dc to dc converter ics will be returned if you search "MIC2164". There are a total of 10 pins on switching converter. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 87 % during power-up and power-down. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. A temperature of -40°C or higher is recommended. DC regulator should run at a temperature of 125°C more than 125°C degrees Celsius. It belongs to the Hyper Speed Control? series of dc to dc voltage regulator. There is 10-MSOP dc dc controller package associated with this part. There are 1 phases in this controller. If the current exceeds 3mA, the component may not operate correctly and may even be damaged.
MIC2164CYMM Features
Transistor Driver Outputs
Switching Frequency: 270kHz
Enable
Max Duty Cycle: 87 %
MIC2164CYMM Applications
There are a lot of Microchip Technology MIC2164CYMM DC to DC converter applications.
- SMT equipment
- Production lines
- Textile machinery
- Surface processing equipment
- Laboratories
- Elevator lighting
- Low output voltage switching power supply circuits
- Emergency lighting monitoring equipment
- Radio equipment
- Computer-related products
