MIC2165YMME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2165 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Number of Channels | 1 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Enable, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 28V |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 82 % |
| Duty Cycle (Max) | 82% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2165YMME Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.5V~28V and has a 4.5V~28V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 600kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Power Good which allows efficient switching control. Searching "MIC2165" will return other relevant dc to dc converter ics. Switching converter has a total of 10 pins. As determined by the test statistics, the output voltage of DC regulator is 5.5V. You should note that the dc dc regulator's usual output current is 25A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 82 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator should be kept at a temperature of -40°C or higher. At125°C, dc regulator should run. Hyper Speed Control? series dc to dc voltage regulator belong to this series. In order to ensure the dc switcher's functionality, users must limit the voltage to 28V due to the dc switcher's maximum input voltage. It would be 10-MSOP-EP for this part's supplier dc dc controller package. Voltage 4.5V is needed for the supply. A dc switcher can only produce an output current of 25A. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. The controller switches with phase number 1. Communication on 1 channels is high-quality. Voltage is rated 28V for maximum supply.
MIC2165YMME Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good
Max Duty Cycle: 82 %
MIC2165YMME Applications
There are a lot of Microchip Technology MIC2165YMME DC to DC converter applications.
- Terrestrial set-top boxes
- Automation technology
- Medical equipment
- Wide-range voltage regulation circuits
- Bending machines
- Surface processing equipment
- Overvoltage protection circuits in TV sets
- Planers
- Laboratories
- Solar power plants
