MIC2168AYMM
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit, Enable |
| Topology | Buck |
| Frequency - Switching | 1MHz |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Duty Cycle | 90 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2168 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Output Current | 14.5A |
| Max Supply Voltage | 14.5V |
| Operating Supply Current | 1.6mA |
| Output Configuration | Positive |
MIC2168AYMM Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 3V~14.5V voltage are supplied and operated. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 1MHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable. Other relevant dc to dc converter ics will be returned if you search "MIC2168". There are 10 pins on switching converter. Statistically, the DC regulator outputs 800mV voltage. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. At -40°C and above, dc regulator should be kept. There should be 125°C more than 125°C degrees Celsius in the machine. There would be 10-MSOP supplier dc dc controller package for this part. An output current greater than 14.5A cannot be provided by the dc switcher. The supply current is 1.6mA. There are 1 phases in this controller. In terms of maximum supply voltage, switching voltage regulators is rated 14.5V.
MIC2168AYMM Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit, Enable
Max Duty Cycle: 90 %
MIC2168AYMM Applications
There are a lot of Microchip Technology MIC2168AYMM DC to DC converter applications.
- Emergency lighting monitoring equipment
- Imported equipment
- Correction machines
- Energy management systems
- Printing
- Smart grid
- Smoke exhaust equipment
- seismic instrument power circuits
- Magnetohydrodynamic power
- Radio equipment
