MIC2168YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2168 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Output Current | 14.5A |
| Max Supply Voltage | 14.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit, Enable |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 14.5V |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Frequency | 1.1MHz |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2168YMM-TR Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 3V~14.5V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. In addition to "MIC2168", there are other relevant dc to dc converter ics you can find. Pins number 10 of switching converter in total. Statistically, the DC regulator outputs 800mV voltage. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator has a maximum frequency of 1.1MHz. The temperature should be at least -40°C. DC regulator should run at a temperature of 125°C more than 125°C degrees Celsius. In order to limit the voltage of a dc switcher whose maximum input voltage is 14.5V, it must be limited by the user. The supplier dc dc controller package for this part would be 10-MSOP. In order to use a 3V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 14.5A. Phases of this controller are 1. Maximum supply voltage is 14.5V. The nominal current supply of this the controllers dc is 3mA.
MIC2168YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit, Enable
Max Duty Cycle: 90 %
MIC2168YMM-TR Applications
There are a lot of Microchip Technology MIC2168YMM-TR DC to DC converter applications.
- Pipe bending machines
- Textile machinery
- Printing equipment
- Automatic testing equipment
- Refrigerators of central air conditioners
- Photovoltaic power
- Electrical distribution systems
- Medical equipment
- Low output voltage switching power supply circuits
- Nuclear power plants
