banner_page

MIC2169AYMM-TR

3V~14.5V 10-Pin MIC2169 DC to DC converter IC1 Outputs 500kHz Transistor Driver


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2169AYMM-TR
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 428
  • Description: 3V~14.5V 10-Pin MIC2169 DC to DC converter IC1 Outputs 500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Supplier Device Package 10-MSOP
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Published 2009
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Frequency 550kHz
Base Part Number MIC2169
Function Step-Down
Number of Outputs 1
Output Voltage 800mV
Output Type Transistor Driver
Max Supply Voltage 14.5V
Output Configuration Positive
Voltage - Supply (Vcc/Vdd) 3V~14.5V
Control Features Current Limit, Enable
Topology Buck
Frequency - Switching 500kHz
Rise Time 30ns
Synchronous Rectifier Yes
Fall Time (Typ) 30 ns
Max Frequency 550kHz
Max Duty Cycle 92 %
Duty Cycle (Max) 92%
Clock Sync No
Output Phases 1
Number of Output Phases 1
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2169AYMM-TR Overview


With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 3V~14.5V and has a 3V~14.5V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller can be switched at 500kHz. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable. In addition to "MIC2169", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 10 pins. The test statistics indicate that DC regulator outputs a voltage of 800mV. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 92 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator's maximum frequency is 550kHz. The switching controller works at a frequency of 550kHz. Temperatures should be kept at -40°C or higher. At a temperature around 125°C degrees Celsius, dc regulator should be running. Supplier dc dc controller package for this part is 10-MSOP. During switching, this controller has a phase of 1. Voltage maximum is rated 14.5V.

MIC2169AYMM-TR Features


Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable
Max Duty Cycle: 92 %
Frequency: 550kHz

MIC2169AYMM-TR Applications


There are a lot of Microchip Technology MIC2169AYMM-TR DC to DC converter applications.

  • Energy management systems
  • Wide-range voltage regulation circuits
  • Serial communication converter
  • Industrial controllers
  • Electric heating, lighting
  • Automatic testing equipment
  • Direct power supply system
  • Smoke prevention equipment
  • Imported equipment
  • Machining centers

Write a review

Note: HTML is not translated!
    Bad           Good