MIC2169BYMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2169 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14.5V |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit |
| Topology | Buck |
| Frequency - Switching | 500kHz |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2169BYMM Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3V~14.5V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 500kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit. MIC2169 can be used to locate other relevant dc to dc converter ics. There are only 10 pins on switching converter. A 800mV voltage of DC regulator was detected in the test statistics. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 92 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. At least -40°C°C is recommended. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. Supplier dc dc controller package for this part is 10-MSOP. The controller switches with phase number 1. Voltage rating is 14.5V.
MIC2169BYMM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit
Max Duty Cycle: 92 %
MIC2169BYMM Applications
There are a lot of Microchip Technology MIC2169BYMM DC to DC converter applications.
- Milling machines
- Pipe bending machines
- Post equipment
- SMT equipment
- Smoke exhaust equipment
- Thermal power
- Handheld GPS
- Shearing machines
- Communication system
- Machining centers
