MIC2169BYMME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP-EP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2169 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14.5V |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit, Enable |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 500kHz |
| Max Input Voltage | 14.5V |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 15 ns |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 920μm |
| Length | 3mm |
| Width | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2169BYMME Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 3V~14.5V volts and has 3V~14.5V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller is capable of switching at the 500kHz position. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable. You can find other relevant dc to dc converter ics by searching "MIC2169". 10 pins are present on switching converter. Test statistics indicate DC regulator outputs 800mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 30A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 92 % during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA temperature of -40°C or higher is recommended. There should be 85°C more than 85°C degrees Celsius in the machine. In order to limit the voltage of a dc switcher whose maximum input voltage is 14.5V, it must be limited by the user. Supplier dc dc controller package for this part is 10-MSOP-EP. A voltage of 3V must be present in the supply. With this controller, the phase is 1. Voltage rating is 14.5V.
MIC2169BYMME Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable
Max Duty Cycle: 92 %
MIC2169BYMME Applications
There are a lot of Microchip Technology MIC2169BYMME DC to DC converter applications.
- Electrical distribution systems
- Television equipment
- Arc suppression circuits
- Smart grid
- Magnetohydrodynamic power
- seismic instrument power circuits
- Post equipment
- Bending machines
- Electric heating, lighting
- Automatic plug-in machines
