MIC2169YMM
| Parameters | |
|---|---|
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Number of Channels | 1 |
| Max Supply Voltage | 14.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 500kHz |
| Max Input Voltage | 14.5V |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 550kHz |
| Base Part Number | MIC2169 |
| Function | Step-Down |
| Number of Outputs | 1 |
MIC2169YMM Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 3V~14.5V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 500kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit. A search for "MIC2169" will reveal other relevant dc to dc converter ics. The switching converter has a total of 10 pins. As determined by the test statistics, the output voltage of DC regulator is 800mV. The maximum duty cycle of this voltage regulator dc to dc is set to 92 % to ensure reliability during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 550kHz. At -40°C and above, dc regulator should be kept. A temperature of 125°C degrees Celsius is recommended. The dc switcher's maximum input voltage is 14.5V, so users must limit the voltage accordingly. There would be 10-MSOP supplier dc dc controller package for this part. Voltage 3V must be supplied. During switching, this controller has a phase of 1. The number of channels available for high-quality communication is 1. As far as maximum supply voltage is concerned, switching voltage regulators is rated as 14.5V. This the controllers dc has a nominal current supply of 3mA.
MIC2169YMM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit
Max Duty Cycle: 92 %
Frequency: 550kHz
MIC2169YMM Applications
There are a lot of Microchip Technology MIC2169YMM DC to DC converter applications.
- Telecommunications equipment
- Product testing
- Driver circuits
- Serial communication converter
- Electric water heaters
- Low output voltage switching power supply circuits
- Adjustable voltage or current linear circuits
- seismic instrument power circuits
- Wind power
- Power supplies of electronic gadgets
