MIC2169YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 550kHz |
| Base Part Number | MIC2169 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~14.5V |
| Control Features | Current Limit |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | 500kHz |
| Max Input Voltage | 14.5V |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Frequency | 550kHz |
| Max Duty Cycle | 92 % |
| Duty Cycle (Max) | 92% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2169YMM-TR Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 3V~14.5V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 500kHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit. MIC2169 can be searched for other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Statistically, DC regulator outputs 800mV volts. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 92 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator has a maximum frequency of 550kHz. Switching controllers operate at 550kHz frequencies. Keep dc regulator at a temperature of -40°C or above. At125°C, dc regulator should run. Since the dc switcher's maximum input voltage is 14.5V, the voltage must be regulated accordingly. There is 10-MSOP dc dc controller package associated with this part. There must be a 3V supply voltage. Switching with 1 phases is the property of this controller. Voltage is rated 14.5V for maximum supply. This the controllers dc receives a 3mA nominal current supply.
MIC2169YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit
Max Duty Cycle: 92 %
Frequency: 550kHz
MIC2169YMM-TR Applications
There are a lot of Microchip Technology MIC2169YMM-TR DC to DC converter applications.
- Elevator lighting
- Emergency lighting monitoring equipment
- Household control circuits
- Computer monitoring equipment of building
- Special machining machine tools
- Pipe bending machines
- Network technology
- Solar power plants
- Shearing machines
- Smoke exhaust equipment
