MIC2172YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC2172 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 65V |
| Output Type | Adjustable |
| Max Output Current | 1.25A |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 40V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 7mA |
| Output Configuration | Positive or Negative, Isolation Capable |
| Current - Output | 1.25A Switch |
| Max Output Voltage | 65V |
| Voltage - Output (Min/Fixed) | 1.24V |
| Topology | Boost, Cuk, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.24V |
| Voltage - Output (Max) | 65V Switch |
| Duty Cycle | 89 % |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2172YN Overview
For optimal performance, this voltage regulator makes use of the Tube package. In this voltage regulator, there are a total of 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. The space-saving 8-DIP (0.300, 7.62mm) package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Adjustable output. This switching regulator is designed to fit the Through Hole mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 100kHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 3V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.24V. As a result of the 1.25A Switch output current, voltage regulator offers maximum flexibility in design. An input voltage of 5V is required to meet the requirements of the switching regulator operation. As a member of the MIC2172 family of DC/DC regulators, this is a DC/DC regulator. Voltage regulator is capable of giving voltage at 65V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 1.24V. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 1.25A A. By using 65V Switch as the maximum output voltage, adjusting voltage regulator is easy to operate. An output voltage of 65V is provided by this regulator voltage. There is a maximum input voltage of 40V that DC DC switching regulator can operate from.
MIC2172YN Features
1 outputs
8 pins
MIC2172YN Applications
There are a lot of Microchip Technology MIC2172YN Voltage Regulators applications.
- Wind power
- Overvoltage protection circuits in TV sets
- Elevator lighting
- Series voltage regulation circuits
- seismic instrument power circuits
- Sink circuits
- Servo drive system
- Experimental setup
- Printing
- Correction machines
