MIC2176-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2176 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 4.5V |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Control Features | Enable |
| Topology | Buck |
| Frequency - Switching | 200kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 250kHz |
| Max Duty Cycle | 93 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2176-2YMM Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tube rating. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~75V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. Searching "MIC2176" will return other relevant dc to dc converter ics. In total, switching converter has 10 pins. Based on the test statistics, DC regulator outputs voltage 800mV. You should note down the dc dc regulator's usual output current of 15A when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 93 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 250kHz. You should keep dc regulator at -40°C degrees or higher. A temperature of 125°C degrees Celsius is recommended. The dc to dc voltage regulator belongs to the Hyper Speed Control? series. There is 10-MSOP dc dc controller package associated with this part. There will be 15A current output from the dc switcher above 15A. Switches with 1 phases are used in this controller. Maximum supply voltage is 75V.
MIC2176-2YMM Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable
Max Duty Cycle: 93 %
MIC2176-2YMM Applications
There are a lot of Microchip Technology MIC2176-2YMM DC to DC converter applications.
- Network technology
- Computer monitoring equipment of building
- ATMs
- Large fire protection systems
- Sink circuits
- Television equipment
- Emergency lighting monitoring equipment
- Smart grid
- Smoke prevention equipment
- Driver circuits
