MIC2176-2YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Hyper Speed Control® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2176 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Control Features | Enable |
| Topology | Buck |
| Frequency - Switching | 200kHz |
| Synchronous Rectifier | Yes |
| Max Frequency | 250kHz |
| Max Duty Cycle | 93 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2176-2YMM-TR Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable. A search for "MIC2176" will reveal other relevant dc to dc converter ics. The switching converter has a total of 10 pins. The test statistics indicate that DC regulator outputs a voltage of 800mV. If you start a project, note down the dc dc regulator's usual output current of 15A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 93 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is a maximum frequency of 250kHz on this dc regulators. At least -40°C°C is recommended. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. Hyper Speed Control? series dc to dc voltage regulator belong to this series. This part's supplier dc dc controller package would be 10-MSOP. DC switcher will not be able to provide an output current above 15A volts. Switching with 1 phases is the property of this controller.
MIC2176-2YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable
Max Duty Cycle: 93 %
MIC2176-2YMM-TR Applications
There are a lot of Microchip Technology MIC2176-2YMM-TR DC to DC converter applications.
- Thermal power
- Computed tomography (CT)
- Computer application technology
- Automation technology
- Flaw detection equipment
- Product testing
- PSRR circuits
- Wide-range voltage regulation circuits
- Surface processing equipment
- Domestic water pumps
