MIC2177YWM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2177 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 16.5V |
| Output Type | Adjustable |
| Max Output Current | 2.5A |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1mA |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Max Output Voltage | 16.5V |
| Voltage - Output (Min/Fixed) | 1.245V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Height | 2.39mm |
| Length | 12.93mm |
| Width | 7.65mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2177YWM Overview
A Tube package is used in this voltage regulator to optimize performance. Throughout this voltage regulator, there are 20 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space savings are achieved by placing this voltage regulator in the 20-SOIC (0.295, 7.50mm Width) package. There are 1 outputs on DC DC switching regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.245V. It features maximum design flexibility due to dc to dc voltage regulator's 2.5A output current. A regulator voltage's peak reflow temperature amounts to 250 being indestructible. For operation, switching regulator requires a nominal input voltage of 7V. The MIC2177 family of DC/DC regulators includes this DC/DC regulator. A voltage of 16.5V volts can be generated by DC DC switching regulator. 20 pins are used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 1.25V volts at all times. A maximum output current of 2.5A A is provided to meet the switching regulator operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 16.5V. When the frequency is 200kHz, DC DC switching regulator can maintain high accuracy.
MIC2177YWM Features
1 outputs
Peak reflow temperature (Cel) of 250
20 pins
MIC2177YWM Applications
There are a lot of Microchip Technology MIC2177YWM Voltage Regulators applications.
- Computer rooms
- Magnetohydrodynamic power
- Electrical distribution systems
- Product burn-in
- Digital display device
- Hydro power
- Energy management systems
- Shearing machines
- Precision electronic equipment
- CMM
