MIC2182-3.3YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2182 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Max Supply Voltage | 32V |
| Operating Supply Current | 2.5mA |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~32V |
| Control Features | Enable, Soft Start |
| Topology | Buck |
| Frequency - Switching | 300kHz |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 60 ns |
| Max Frequency | 330kHz |
| Max Duty Cycle | 86 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 86% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2182-3.3YM Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~32V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 300kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. Searching "MIC2182" will return other relevant dc to dc converter ics. 16 pins are present on switching converter. DC regulator outputs 3.3V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 20mA, so note that when you start the project. It is set to 86 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator's maximum frequency is 330kHz. You should keep dc regulator at -40°C degrees or higher. There should be 85°C more than 85°C degrees Celsius in the machine. Its supplier dc dc controller package is 16-SOIC. The dc switcher will not provide an output current greater than 20A. It runs on a 2.5mA supply current. With this controller, the phase is 1. When it comes to maximum supply voltage, switching voltage regulators is rated 32V.
MIC2182-3.3YM Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %
MIC2182-3.3YM Applications
There are a lot of Microchip Technology MIC2182-3.3YM DC to DC converter applications.
- Window air conditioners
- Packaging
- Milling machines
- Computed tomography (CT)
- Fire elevators
- Thermal power
- Precision electronic equipment
- Solar power plants
- Magnetohydrodynamic power
- Bending machines
