banner_page

MIC2182-3.3YM-TR

4.5V~32V 16-Pin MIC2182 DC to DC converter IC1 Outputs 300kHz Transistor Driver


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2182-3.3YM-TR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 112
  • Description: 4.5V~32V 16-Pin MIC2182 DC to DC converter IC1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2182
Function Step-Down
Number of Outputs 1
Output Voltage 3.3V
Output Type Transistor Driver
Max Supply Voltage 32V
Output Configuration Positive
Output Current 20mA
Voltage - Supply (Vcc/Vdd) 4.5V~32V
Control Features Enable, Soft Start
Topology Buck
Frequency - Switching 300kHz
Rise Time 60ns
Synchronous Rectifier Yes
Fall Time (Typ) 60 ns
Max Frequency 330kHz
Max Duty Cycle 86 %
Duty Cycle (Max) 86%
Clock Sync Yes
Output Phases 1
Number of Output Phases 1
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2182-3.3YM-TR Overview


Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 4.5V~32V. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 300kHz . dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. Other relevant dc to dc converter ics can be found by searching "MIC2182". There are a total of 16 pins on switching converter. Test statistics indicate DC regulator outputs 3.3V voltage. You should note down the dc dc regulator's usual output current of 20mA when you start a project. It is set to 86 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. 330kHz is the maximum frequency of this dc regulators. DC regulator should be kept at a temperature of -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. The supplier dc dc controller package for this part would be 16-SOIC. The controller switches with phase number 1. As far as maximum supply voltage is concerned, switching voltage regulators is rated as 32V.

MIC2182-3.3YM-TR Features


Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %

MIC2182-3.3YM-TR Applications


There are a lot of Microchip Technology MIC2182-3.3YM-TR DC to DC converter applications.

  • Computer application technology
  • Smart grid
  • Smoke prevention equipment
  • Hydrogen power
  • Packaging
  • Overvoltage protection circuits in TV sets
  • Nuclear power plants
  • Drilling machines
  • Planers
  • Imported equipment

Write a review

Note: HTML is not translated!
    Bad           Good