MIC2182-3.3YSM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2182 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Max Supply Voltage | 32V |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~32V |
| Control Features | Enable, Soft Start |
| Topology | Buck |
| Frequency - Switching | 300kHz |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 60 ns |
| Max Frequency | 330kHz |
| Max Duty Cycle | 86 % |
| Duty Cycle (Max) | 86% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2182-3.3YSM Overview
Capsuled in the 16-SSOP (0.209, 5.30mm Width) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). A 4.5V~32V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. This switching controller can switch at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Soft Start. MIC2182 can be searched for other relevant dc to dc converter ics. There are only 16 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 3.3V. If you start a project, note down the dc dc regulator's usual output current of 20mA. Voltage regulator dc to dc is designed to operate at 86 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator330kHz has the maximum frequency. Temperatures should be kept at -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. It would be 16-SSOP for this part's supplier dc dc controller package. Output current will not exceed 20A. Switching with 1 phases is the property of this controller. Voltage maximum is rated 32V.
MIC2182-3.3YSM Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %
MIC2182-3.3YSM Applications
There are a lot of Microchip Technology MIC2182-3.3YSM DC to DC converter applications.
- Adjustable voltage or current linear circuits
- seismic instrument power circuits
- Current source circuits
- Smart grid
- Experimental setup
- Production lines
- Access control systems
- Grinders
- Planers
- Magnetohydrodynamic power
