banner_page

MIC2182-5.0YM

4.5V~32V 16-Pin MIC2182 DC to DC converter IC1 Outputs 300kHz Transistor Driver


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2182-5.0YM
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 440
  • Description: 4.5V~32V 16-Pin MIC2182 DC to DC converter IC1 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tube
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2182
Function Step-Down
Number of Outputs 1
Output Voltage 5V
Output Type Transistor Driver
Max Output Current 20A
Max Supply Voltage 32V
Operating Supply Current 2.5mA
Output Configuration Positive
Output Current 20mA
Voltage - Supply (Vcc/Vdd) 4.5V~32V
Control Features Enable, Soft Start
Topology Buck
Frequency - Switching 300kHz
Rise Time 60ns
Synchronous Rectifier Yes
Fall Time (Typ) 60 ns
Max Frequency 330kHz
Max Duty Cycle 86 %
Isolation Non-Isolated
Duty Cycle (Max) 86%
Clock Sync Yes
Output Phases 1
Number of Output Phases 1
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2182-5.0YM Overview


As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~32V and has a 4.5V~32V supply voltage. Work well in dc switchers with a -40°C~85°C TA. It can switch at 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Soft Start. Other relevant dc to dc converter ics will be returned if you search "MIC2182". There are 16 pins on switching converter. Statistically, DC regulator outputs 5V volts. If you start a project, note down the dc dc regulator's usual output current of 20mA. voltage regulator dc to dcs with a 86 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 330kHz on this dc regulators. At least -40°C°C is recommended. The temperature should not exceed 85°C degrees Celsius. There is 16-SOIC dc dc controller package associated with this part. DC switcher will not be able to provide an output current above 20A volts. A current of 2.5mA is supplied to it. With this controller, the phase is 1. Voltage maximum is rated 32V.

MIC2182-5.0YM Features


Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
Max Duty Cycle: 86 %

MIC2182-5.0YM Applications


There are a lot of Microchip Technology MIC2182-5.0YM DC to DC converter applications.

  • ATMs
  • Overvoltage protection circuits in TV sets
  • Motor controller circuits
  • Flexible manufacturing cells
  • Handheld GPS
  • Serial communication converter
  • Surface processing equipment
  • seismic instrument power circuits
  • Wide-range voltage regulation circuits
  • Terrestrial set-top boxes

Write a review

Note: HTML is not translated!
    Bad           Good