banner_page

MIC2183YM-TR

2.9V~14V 16-Pin MIC2183 DC to DC converter IC1 Outputs 200kHz 400kHz Transistor Driver


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2183YM-TR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 137
  • Description: 2.9V~14V 16-Pin MIC2183 DC to DC converter IC1 Outputs 200kHz 400kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2183
Function Step-Down
Number of Outputs 1
Output Voltage 12V
Output Type Transistor Driver
Max Supply Voltage 14V
Output Configuration Positive
Voltage - Supply (Vcc/Vdd) 2.9V~14V
Control Features Enable, Frequency Control, Soft Start
Topology Buck
Frequency - Switching 200kHz 400kHz
Rise Time 50ns
Synchronous Rectifier Yes
Fall Time (Typ) 50 ns
Max Frequency 440kHz
Max Duty Cycle 100 %
Duty Cycle (Max) 100%
Clock Sync Yes
Output Phases 1
Number of Output Phases 1
RoHS Status ROHS3 Compliant

MIC2183YM-TR Overview


The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. 1 outputs can be generated with the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). Voltages 2.9V~14V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. It can switch at 200kHz 400kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. A search for "MIC2183" will reveal other relevant dc to dc converter ics. Pins number 16 of switching converter in total. The test statistics indicate that DC regulator outputs a voltage of 12V. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator's maximum frequency is 440kHz. A temperature -40°C lower than -40°C should be maintained. At85°C, dc regulator should run. This part's supplier dc dc controller package would be 16-SOIC. The phase of this controller is 1. In terms of maximum supply voltage, switching voltage regulators is rated 14V.

MIC2183YM-TR Features


Transistor Driver Outputs
Switching Frequency: 200kHz 400kHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 100 %

MIC2183YM-TR Applications


There are a lot of Microchip Technology MIC2183YM-TR DC to DC converter applications.

  • Surge protection circuits
  • Servo drive system
  • Power supplies of electronic gadgets
  • Mobile phones
  • Constant current circuits
  • Hydraulic presses
  • Game consoles
  • Television equipment
  • Fire elevators
  • Ball screw pair

Write a review

Note: HTML is not translated!
    Bad           Good