MIC2184YQS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 400kHz |
| Base Part Number | MIC2184 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14V |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.9V~14V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Frequency - Switching | 400kHz |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Max Frequency | 440kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | Yes |
| Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2184YQS Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 2.9V~14V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 400kHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. MIC2184 can be searched for other relevant dc to dc converter ics. 16 pins are on switching converter. Test statistics indicate DC regulator outputs 12V voltage. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 440kHz. There is 400kHz frequency setting on the switching controller. DC regulator should be kept at a temperature of -40°C or higher. At a temperature around 125°C degrees Celsius, dc regulator should be running. It would be 16-QSOP for this part's supplier dc dc controller package. Voltage maximum is rated 14V.
MIC2184YQS Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Frequency Control, Soft Start
Frequency: 400kHz
MIC2184YQS Applications
There are a lot of Microchip Technology MIC2184YQS DC to DC converter applications.
- Surge protection circuits
- Textile machinery
- Television equipment
- Scientific testing
- Printing
- Nuclear power plants
- Flaw detection equipment
- Fire elevators
- Emergency lighting monitoring equipment
- Terrestrial set-top boxes
