MIC2186YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 440kHz |
| Base Part Number | MIC2186 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14V |
| Operating Supply Current | 700μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.9V~14V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Boost |
| Frequency - Switching | 100kHz 200kHz 400kHz |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 85 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 85% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2186YM Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 2.9V~14V voltage are supplied and operated. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at 100kHz 200kHz 400kHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. You can find other relevant dc to dc converter ics by searching "MIC2186". There are only 16 pins on switching converter. As determined by the test statistics, the output voltage of DC regulator is 12V. Voltage regulator dc to dc is designed to operate at 85 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 440kHz frequency setting on the switching controller. DC regulator should be kept at a temperature of -40°C or higher. A temperature of 85°C degrees Celsius is recommended. There would be 16-SOIC supplier dc dc controller package for this part. It runs on a 700μA supply current. Switching with 1 phases is the property of this controller. Voltage rating is 14V.
MIC2186YM Features
Transistor Driver Outputs
Switching Frequency: 100kHz 200kHz 400kHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 85 %
Frequency: 440kHz
MIC2186YM Applications
There are a lot of Microchip Technology MIC2186YM DC to DC converter applications.
- Automatic plug-in machines
- Elevator lighting
- Solar power plants
- USB circuits
- Imported equipment
- Grinders
- Milling machines
- Automatic testing equipment
- Surface processing equipment
- Alternators
