MIC2196YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Rated DC | 3V |
| Max Power Dissipation | 285mW |
| Frequency | 400kHz |
| Base Part Number | MIC2196 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 2.9V |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 2.9V~14V |
| Control Features | Enable |
| Topology | Boost |
| Frequency - Switching | 400kHz |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 14V |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2196YM Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 2.9V~14V and has a 2.9V~14V supply voltage. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 400kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable provides dcdc regulator efficient switching control. In addition to "MIC2196", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 8. Statistically, the DC regulator outputs 12V voltage. If you start a project, note down the dc dc regulator's usual output current of 3A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 85 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 400kHz is the frequency of the switching controller. Keep dc regulator at a temperature of -40°C or above. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. A nominal working status is achieved when the input voltage is set to 14V. The supplier dc dc controller package for this part would be 8-SOIC. With this controller, the phase is 1. When it comes to maximum supply voltage, switching voltage regulators is rated 14V.
MIC2196YM Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable
Max Duty Cycle: 85 %
Frequency: 400kHz
MIC2196YM Applications
There are a lot of Microchip Technology MIC2196YM DC to DC converter applications.
- Direct power supply system
- Adjustable voltage or current linear circuits
- Constant current circuits
- Machining centers
- Photovoltaic power
- Printing equipment
- Computer-related products
- Post equipment
- Flaw detection equipment
- Drilling machines
