MIC2282YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 20kHz |
| Base Part Number | MIC2282 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 900mV |
| Power Dissipation | 250mW |
| Max Supply Current | 120μA |
| Voltage - Output | 35V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.1A |
| Current - Output / Channel | 1.1A Switch |
| Internal Switch(s) | Yes |
| Number of Segments | 3 |
| Voltage - Supply (Max) | 15V |
| Voltage - Supply (Min) | 0.9V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2282YMM Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package saves space on the board. There are 1 outputs used for the design of this LED drivers.The mounting method is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.LED drivers capable of operating at -40°C~85°C TA can be used.It operates on the basis of the frequency of 20kHz.It has a base configuration of 8 pins.The voltage supply can fail if it is below 0.9V.The segment count is 3.It is mounted in the way of Surface Mount.It is under the base part number MIC2282 that you can find this LED driver.It is acceptable to supply voltages of 15V.A 35V volt output voltage is provided by this device.Optimally, it provides a voltage value of 15V for the maximum supply voltage.As a result, it runs at a minimal voltage of 900mV in order to achieve the best efficiency.When the maximum supply current is below 120μA, the device can deliver high efficiency.It is important not to exceed 125°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.A total of 1 channels are currently available for transmission.
MIC2282YMM Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20kHz
MIC2282YMM Applications
There are a lot of Microchip Technology MIC2282YMM LED Driver ICs applications.
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
- Linear fluorescent
- Constant Voltage Power Source for portable equipment
- Down lighting
- Flicker-free LED Lighting using R1580N
- Medical surgery lighting
- Refrigeration lighting
- Stage and Studio lighting
- Portable lighting
