MIC2287-24YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, 8-MLF® |
| Number of Pins | 8 |
| Supplier Device Package | 8-MLF® (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Frequency | 1.2MHz |
| Base Part Number | MIC2287 |
| Number of Outputs | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 20mA |
| Max Supply Current | 5mA |
| Voltage - Output | 24V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 750mA |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 8 |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2287-24YML-TR Overview
The 8-VFDFN Exposed Pad, 8-MLF? package is used for saving board space. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.There is no doubt that this is a very efficient and reliable DC DC Regulator.When the temperature is -40°C~125°C TJ, it can work normally.Backlight, Camera Flash has significant advantages.A frequency of 1.2MHz is used to operate it.The base of this board is configured as 8 pins.A voltage supply below 2.5V may cause undetermined failures.8 segments exist.I have mounted it by Surface Mount.It is under the base part number MIC2287 that the LED driver can be found.It is acceptable for the voltage to be 10V.The voltage output by it is 24V.There is a maximum value of 10V supply voltage supported by this device. The maximum efficiency can be achieved by operating it at a minimal voltage of 2.5V.If the maximum current supply is less than 5mA, this device provides high efficiency.It is important that the operating temperature not exceed 125°C in order to ensure stable operation.It is possible to supply the load with 20mA current.Stable operation requires a temperature greater than -40°C.
MIC2287-24YML-TR Features
Available in the 8-VFDFN Exposed Pad, 8-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
MIC2287-24YML-TR Applications
There are a lot of Microchip Technology MIC2287-24YML-TR LED Driver ICs applications.
- Other Electronic Devices
- Linear fluorescent
- Architectural lighting
- General lighting
- Industrial LED Lighting: Image Recognition Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage Lighting and Signage
- OLED power supply for portable equipment
- Down lighting
- Scanners and Handy Terminals
