banner_page

MIC2287C-34YML-TR

PMIC MIC2287 8 Pin 1.2MHz 8-VFDFN Exposed Pad, 8-MLF?


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2287C-34YML-TR
  • Package: 8-VFDFN Exposed Pad, 8-MLF®
  • Datasheet: PDF
  • Stock: 118
  • Description: PMIC MIC2287 8 Pin 1.2MHz 8-VFDFN Exposed Pad, 8-MLF? (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VFDFN Exposed Pad, 8-MLF®
Number of Pins 8
Supplier Device Package 8-MLF® (2x2)
Operating Temperature -40°C~105°C TJ
Packaging Tape & Reel (TR)
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type DC DC Regulator
Max Operating Temperature 105°C
Min Operating Temperature -40°C
Applications Backlight
Frequency 1.2MHz
Base Part Number MIC2287
Number of Outputs 1
Output Voltage 37V
Max Supply Voltage 10V
Min Supply Voltage 2.5V
Topology Step-Up (Boost)
Output Current per Channel 750mA
Current - Output / Channel 750mA Switch
Internal Switch(s) Yes
Dimming Analog, PWM
Number of Segments 6
Voltage - Supply (Max) 10V
Voltage - Supply (Min) 2.5V
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2287C-34YML-TR Overview


To save space on the board, it has a 8-VFDFN Exposed Pad, 8-MLF? package. LED drivers with this design have 1 outputs.The led driver mounting is done by using Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.At -40°C~105°C TJ, the led driver is capable of operating.A number of benefits are available to Backlight.A frequency of 1.2MHz is used to operate it.To form its configuration, 8 pins are used.Undetermined failures may occur if the voltage supply falls below 2.5V.It is estimated that there are 6 segments.It's mounted on the way to Surface Mount.This LED driver can be found under the base part number MIC2287.An acceptable maximum value for the supply voltage is 10V.In this case, the maximum value will be 10V.To meet high efficiency standards, it works with a voltage of 2.5V.It is important not to exceed 105°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.There is 37V voltage output from it.

MIC2287C-34YML-TR Features


Available in the 8-VFDFN Exposed Pad, 8-MLF? package
Operating temperature of -40°C~105°C TJ
Frequency of 1.2MHz
Output voltage of 37V

MIC2287C-34YML-TR Applications


There are a lot of Microchip Technology MIC2287C-34YML-TR LED Driver ICs applications.

  • General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
  • LED backlight driver for LCD displays for Tablets and Note PCs
  • Power source for accessories such as car audios, car navigation systems, and ETC systems
  • General lighting
  • Street lighting
  • High-end retail lighting
  • Flicker-free LED Lighting using R1580N
  • White LED Backlight for portable equipment
  • Architectural lighting
  • Gallery lighting

Write a review

Note: HTML is not translated!
    Bad           Good