MIC2293-15YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, 8-MLF® |
| Number of Pins | 8 |
| Supplier Device Package | 8-MLF® (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 2MHz |
| Base Part Number | MIC2293 |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 500mA |
| Max Output Voltage | 15V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 10V |
| Output Current per Channel | 750mA |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2293-15YML-TR Overview
In order to save board space, the 8-VFDFN Exposed Pad, 8-MLF? package is used. LED drivers with this design have 1 outputs.To mount, use Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The led light driver is capable of operating at the operating temperature of -40°C~125°C TJ.As a result, Backlight is likely to benefit greatly.The frequency of 2MHz is used as the basis for its operation.The base of this board is configured as 8 pins.It is possible for undetermined failures to occur if the voltage supply falls below 2.5V.There are 3 segments.Surface Mount is mounted on it.The base part number for this LED driver is MIC2293.It's acceptable for the voltage to be 10V.A maximum voltage of 10V is optimized for use by this device.A minimal input voltage of 2.5V is required for it to operate.It achieves maximum efficiency with a minimal voltage supply of 2.5V.In the event that the maximum supply current is allowed, it reaches 10V.The operating temperature should not exceed 125°C to ensure stable operation.It is possible to supply the load with 500mA current.For stable operation, the operating temperature should be higher than -40°C.There is 15V voltage output from it.It is recommended that the output voltage be no higher than 15V.There are currently 1 channels available for transmission.
MIC2293-15YML-TR Features
Available in the 8-VFDFN Exposed Pad, 8-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Output voltage of 15V
MIC2293-15YML-TR Applications
There are a lot of Microchip Technology MIC2293-15YML-TR LED Driver ICs applications.
- Stage and Studio lighting
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- A- lamps
- Gallery lighting
- Architectural lighting
- OLED power supply for portable equipment
- Linear fluorescent
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Street lighting
