MIC2293C-34YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, 8-MLF® |
| Number of Pins | 8 |
| Supplier Device Package | 8-MLF® (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 2MHz |
| Base Part Number | MIC2293 |
| Number of Outputs | 1 |
| Output Voltage | 34V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 500mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 10V |
| Output Current per Channel | 750mA |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MIC2293C-34YML-TR Overview
There is a 8-VFDFN Exposed Pad, 8-MLF? package on the board that is used to save space. 1 outputs are designed into LED drivers.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.-40°C~125°C TJ is the operating temperature for the led light driver.There are significant benefits for Backlight.In the 2MHz frequency range, it operates.In this LED driver, the base is configured as 8.If the voltage supply is less than 2.5V, undetermined failures will occur.The number of segments is 3.The mount is in the direction of Surface Mount.It is under the base part number MIC2293 that you can find this LED driver.Ideally, the supply voltage should be 10V.Supply voltage can be set to a maximum value of 10V.It operates with the minimal input voltage of 2.5V.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 2.5V.The maximum value of supply current is 10V.For stable operation, it is recommended that the operating temperature not exceed 125°C.There is no current that can be supplied to the load.Maintaining a temperature above -40°C is essential for stabilizing operation.The output voltage is 34V.
MIC2293C-34YML-TR Features
Available in the 8-VFDFN Exposed Pad, 8-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Output voltage of 34V
MIC2293C-34YML-TR Applications
There are a lot of Microchip Technology MIC2293C-34YML-TR LED Driver ICs applications.
- Down lighting
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
- Medical surgery lighting
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- Sports Facility Lighting
