MIC2297-42YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, 10-MLF® |
| Number of Pins | 10 |
| Supplier Device Package | 10-MLF® (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 600kHz |
| Base Part Number | MIC2297 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.2A |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 10V |
| Output Current per Channel | 1.2A |
| Current - Output / Channel | 1.2A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 10 |
| Switching Frequency | 600kHz |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2297-42YML-TR Overview
To save space on the board, it has a 10-VFDFN Exposed Pad, 10-MLF? package. For the design of this LED driver, 1 outputs are used.Surface Mount is used to mount the led driver.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -40°C~125°C TJ.The system operates at a frequency of 600kHz.There are 10 pins on the base of this LED driver.Failures may occur if the voltage supply is below 2.5V.The segment count is 10.On the Surface Mount, a device is mounted.Under the base part number MIC2297, you'll find this LED driver.It's acceptable for the voltage to be 10V.An optimal value of supply voltage is 10V.A voltage of 2.5V is its minimal input voltage.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.5V.There is 10V maximum value for supply current.For stable operation, the operating temperature should not exceed 125°C.A load can be supplied with 1.2A current.The operating temperature should be higher than -40°C so as to realize stable operation.It's possible for this electronic component to fully function when the switching frequency is maintained at 600kHz.There is 40V voltage at the output terminal.Transmissions are currently available on 1 channels.
MIC2297-42YML-TR Features
Available in the 10-VFDFN Exposed Pad, 10-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 600kHz
Switching frequency of 600kHz
Output voltage of 40V
MIC2297-42YML-TR Applications
There are a lot of Microchip Technology MIC2297-42YML-TR LED Driver ICs applications.
- Linear fluorescent
- Stage Lighting and Signage
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Medical surgery lighting
- Museum lighting
- Refrigeration lighting
- Amusement Machines
