MIC2298-15YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad, 12-MLF® |
| Number of Pins | 12 |
| Supplier Device Package | 12-MLF™ (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Camera Flash |
| Frequency | 1MHz |
| Base Part Number | MIC2298 |
| Number of Outputs | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 4.75A |
| Quiescent Current | 15mA |
| Voltage - Output | 15V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 10V |
| Output Current per Channel | 3.5A |
| Current - Output / Channel | 3.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 2 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| Height | 830μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2298-15YML-TR Overview
Using its 12-VFDFN Exposed Pad, 12-MLF? package, it is possible to save board space. In LED drivers, the outputs are all set to 1.Surface Mount is used to mount the led driver.This emerges as a DC DC Regulator with high efficiency and reliability.When the temperature is -40°C~125°C TJ, it can work normally.Taking advantage of Camera Flash has considerable benefits.In this case, the frequency is 1MHz.There are 12 pins on the base of this LED driver.If the voltage supply is less than 2.5V, undetermined failures will occur.There are 2 segments in it.There is a mounting of it by Surface Mount.There is a base part number MIC2298 for this LED driver.The supply voltage of 10V is an acceptable maximum value.A voltage output of 15V is provided by this device.An optimal value of supply voltage is 10V.The minimal input voltage is 2.5V.The system operates at a minimum supply voltage of 2.5V in order to achieve maximum efficiency.Supply current is limited to 10V at its maximum value.Temperatures above 125°C should not be allowed to exceed operating temperatures in order to ensure stable operation.There is no current that can be supplied to the load.Stable operation requires an operating temperature greater than -40°C.It is capable of fulfilling its full functionality when the switching frequency remains at 1MHz.No external factors cause 15mA current to be consumed.
MIC2298-15YML-TR Features
Available in the 12-VFDFN Exposed Pad, 12-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Switching frequency of 1MHz
MIC2298-15YML-TR Applications
There are a lot of Microchip Technology MIC2298-15YML-TR LED Driver ICs applications.
- Down lights
- Architectural lighting
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
- LED backlight driver for LCD displays for portable equipment
- OLED power supply for portable equipment
- Stage Lighting and Signage
- Gallery lighting
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
