MIC23099YFT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-UFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MIC23099 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 2 |
| Voltage - Input (Max) | 1.6V |
| Output Type | Adjustable |
| Voltage - Output 1 | 3.3V |
| Voltage - Input (Min) | 0.85V |
| Supply Voltage-Max (Vsup) | 1.6V |
| Supply Voltage-Min (Vsup) | 0.875V |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | Positive |
| Current - Output | 30mA 1A Switch |
| Adjustable Threshold | YES |
| Max Output Voltage | 3.3V |
| Voltage - Output 2 | 3.3V |
| Voltage - Output (Min/Fixed) | 1V 1.8V |
| Topology | Buck, Boost |
| Frequency - Switching | 1MHz 80kHz |
| Current - Output 1 | 200mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Voltage - Output (Max) | 1.6V 3.3V |
| Current - Output 2 | 30mA |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MIC23099YFT-T5 Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. There are 14 terminations in this voltage regulator. As this regulator voltage is equipped with an analog IC of the type POWER SUPPLY SUPPORT CIRCUIT, it is a POWER SUPPLY SUPPORT CIRCUIT-type voltage regulator. In order to save space, this voltage regulator is packaged in the 14-UFQFN Exposed Pad package. The voltage regulator is configured with 2 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. The switching frequency of this DC-DC switching regulator reaches 1MHz 80kHz. Voltage regulators like this one can operate at least with 0.85V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1V 1.8V. This voltage regulator 12v features maximum design flexibility thanks to its 30mA 1A Switch output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 1.6V. As part of the MIC23099 series of regulators, the voltage regulators can be found. For switching regulator operation, 14 pins are used. The output voltage of this voltage regulator 12v should at least be set at 1.8V volts at all times. By using 1.6V 3.3V as the maximum output voltage, adjusting voltage regulator is easy to operate. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 3.3V. I would recommend this voltage regulator for use on a 1.25V volt supply, as it is suitable for this application. It is a voltage regulator 12v that has a 2 channel configuration.
MIC23099YFT-T5 Features
2 outputs
14 pins
2 channels
MIC23099YFT-T5 Applications
There are a lot of Microchip Technology MIC23099YFT-T5 Voltage Regulators applications.
- Computer monitoring equipment of building
- Arc suppression circuits
- Scientific research
- Computer application technology
- Smoke prevention equipment
- Overvoltage protection circuits in TV sets
- Analog precision reference circuits
- Textile machinery
- Medical equipment
- Computer-related products
