MIC23303YML-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Series | HyperLight Load® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MIC23303 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 3.6V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 3.6V |
| Voltage - Output (Min/Fixed) | 0.65V |
| Topology | Buck |
| Frequency - Switching | 4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 650mV |
| Height | 830μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC23303YML-T5 Overview
Using the Cut Tape (CT) package, this voltage regulator optimizes the performance of the voltage regulator 12v. During the development of this harley voltage regulator, 12 terminations were made. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. The harley voltage regulator is available as a 12-VFDFN Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This voltage regulator 12v reaches a switching frequency of 4MHz. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 0.65V. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. For operation, switching regulator requires a nominal input voltage of 3.6V. As a member of the MIC23303 family of DC/DC regulators, this is a DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at 3.6V volts. In order to operate voltage regulator, 12 pins are required. Ideally this switch regulator should have an output voltage of about 650mV at the very least. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 3A A. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 3.6V. The switching DC-DC regulator belongs to the HyperLight Load? family of electronic voltage regulator 12vs.
MIC23303YML-T5 Features
1 outputs
12 pins
MIC23303YML-T5 Applications
There are a lot of Microchip Technology MIC23303YML-T5 Voltage Regulators applications.
- Emergency lighting monitoring equipment
- Imported equipment
- Electrical power transmission
- Power supplies of electronic gadgets
- Injection molding machinery
- Large fire protection systems
- Bending machines
- Automatic plug-in machines
- Grinders
- Planers
