MIC24420YML-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad, 24-MLF® |
| Number of Pins | 24 |
| Supplier Device Package | 24-MLF® (4x4) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC24420 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Control Features | Enable, Power Good |
| Topology | Buck |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | No |
| Max Duty Cycle | 76 % |
| Duty Cycle (Max) | 76% |
| Clock Sync | No |
| Output Phases | 2 |
| Number of Output Phases | 2 |
| RoHS Status | ROHS3 Compliant |
MIC24420YML-TR Overview
This switching controller fits most application requirements since it is packaged in a 24-VFQFN Exposed Pad, 24-MLF? package. There is enough capacity in the dc motor controller to generate the output for the 2 input. Cut Tape (CT) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 4.5V~15V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Power Good. Other relevant dc to dc converter ics can be found by searching "MIC24420". 24 pins are present on switching converter. A duty cycle set at 76 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator should be kept at a temperature of -40°C or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. Its supplier dc dc controller package is 24-MLF? (4x4). There are 2 phases in this controller.
MIC24420YML-TR Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good
Max Duty Cycle: 76 %
MIC24420YML-TR Applications
There are a lot of Microchip Technology MIC24420YML-TR DC to DC converter applications.
- Terrestrial set-top boxes
- Electrical distribution systems
- Computer monitoring equipment of building
- Ball screw pair
- Milling machines
- Automatic plug-in machines
- Computer-related products
- Bending machines
- Sensitive electronic devices
- Experimental setup
