Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1998 |
Feature |
Slew Rate Controlled, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
30mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Current Rating |
2A |
Base Part Number |
MIC2505 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
2A |
Number of Channels |
1 |
Interface |
On/Off |
Max Supply Voltage |
7.5V |
Min Supply Voltage |
2.7V |
Current - Output (Max) |
2A |
Nominal Supply Current |
2A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
2 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
7.5V |
Nominal Input Voltage |
7.5V |
Turn-Off Delay Time |
20 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~7.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Load Current |
2A |
Rds On (Typ) |
30mOhm |
Drain to Source Resistance |
35mOhm |
Height |
1.48mm |
Length |
4.93mm |
Width |
3.94mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2505-2YM Overview
The LED driver's packaged as a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.The MIC2505 family contains this object.During operation, the 8 pins are used.2AV is the maximum output of the LED driver.The maximum output current drops to 2A in order to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.There is 30mOhm resistance on the LED driver.The total number of channels is 1.There is a maximum input voltage of 7.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.A maximum operating temperature of 85°C°C is required to provide stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.7.5VV is the maximum supply voltage it can handle.It is also capable of running at 2.7V volts if necessary.
MIC2505-2YM Features
Resistance of 30mOhm
1 channels
MIC2505-2YM Applications
There are a lot of Microchip Technology MIC2505-2YM Power Switches ICs applications.
- PC Cards
- Portable GPS
- USB Ports/Hubs
- Hot Swap
- HDD and SSD
- USB Power Distribution
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Hot Swap
- HDD, SSD