MIC2505BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 7.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~7.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 30m Ω |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MIC2505BN Overview
It's?packaged?in?the way?of?a?Tube.There is a 8-DIP (0.300, 7.62mm) package that includes it.This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled, Status Flag features.The termination count is 8.As far as functions are concerned, the lighting driver has 1.In this case, the LED driving board can produce only 2AV as its maximum output.With a supply voltage of 5V, high efficiency is possible.The LED driver has a total of 8 pins.The LED driver is configured with a maximum supply voltage of 7.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.
MIC2505BN Features
Supplied from 5V
1 channels
MIC2505BN Applications
There are a lot of Rochester Electronics, LLC MIC2505BN Power Switches ICs applications.
- Storage Drives
- Portable Music Players
- USB3.1 Power Delivery
- PC Card Hot Swap
- HDD, SSD
- Hot Swaps
- PC Cards
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Hard Disk Drives
