MIC2505BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2505 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 7.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~7.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 30m Ω |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MIC2505BN Overview
It is packaged in the form of a Tube.In the 8-DIP (0.300, 7.62mm) package, it is included.The lighting driver is mounted in the Through Hole position.General Purpose is the switch type it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It comes under the family of MIC2505.It contains 8 terminations.It contains 1 functions.The LED driver output is limited to 2AV.The supply voltage can be 5V for high efficiency.8 pins are connected to it in total.In this LED driver, the maximum supply voltage is configured to be 7.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.
MIC2505BN Features
Supplied from 5V
1 channels
MIC2505BN Applications
There are a lot of Microchip Technology MIC2505BN Power Switches ICs applications.
- Set-Top Boxes
- Mobile Communication Devices
- Hard Disk Drives
- Hot-Swap Systems
- Portable GPS Device
- Hot Swaps
- Hot Swap
- Wireless/Networking Cards
- PC Cards
- Telecom and Network Systems
