MIC2505YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2505 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 7.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~7.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 30m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2505YM-TR Overview
A Tape & Reel (TR) is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It belongs to the family MIC2505.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 2A.As long as the supply voltage is 5V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.75MOhm resistance is present in the lighting driver.The maximum supply voltage is set to 7.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.
MIC2505YM-TR Features
Supplied from 5V
Resistance of 75MOhm
1 channels
MIC2505YM-TR Applications
There are a lot of Microchip Technology MIC2505YM-TR Power Switches ICs applications.
- Wireless Headsets
- HDD and SSD
- Portable Music Players
- Portable GPS Device
- Solid State Drivers
- PC Cards
- Wireless Modem Data Cards
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
