MIC2506YM
| Parameters | |
|---|---|
| Operating Supply Voltage | 7.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 7.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 7.5V |
| Nominal Input Voltage | 7.5V |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~7.5V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Load Current | 1A |
| Rds On (Typ) | 75mOhm |
| Drain to Source Resistance | 35mOhm |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 75mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1A |
| Base Part Number | MIC2506 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
MIC2506YM Overview
The LED driver's packaged as a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.I believe it belongs to the MIC2506 family.For operation, 8 pins are used.From the lighting driver, there is a maximum output of 1AV.To meet the operation criteria, the maximum output current drops to 1A.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 75mOhm resistance.To choose from, there are 2 channels.For maximum efficiency, the supply voltage should be set to 7.5V.This LED driver can handle voltages up to 7.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.There is a maximum voltage of 7.5VV that it can handle.You can also run it at 2.7V volts if required.
MIC2506YM Features
Resistance of 75mOhm
2 channels
MIC2506YM Applications
There are a lot of Microchip Technology MIC2506YM Power Switches ICs applications.
- Hot Swaps
- Hot Swap
- Hot Swap
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Wearable Devices
- Smart Phones, Feature Phones
- Telecom and Network Systems
- HDD, SSD
- Mobile Communication Devices
