MIC2514BM5-TR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | IttyBitty® |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2514 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | On/Off |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~13.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 950m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
MIC2514BM5-TR Overview
It is packaged in the manner of a Tape & Reel (TR).The SC-74A, SOT-753 package includes it.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.A maximum voltage of P-Channel volts is available from the output of this LED driver.As you can see, it comes from the MIC2514 family.There are 5 terminations in it.As far as functions are concerned, the lighting driver has 1.The lighting driver's maximum output is 1.2AV.Using a voltage of 5V allows for high efficiency.As a result, it has a total of 5 pins.This electrical component is included in the IttyBitty? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.
MIC2514BM5-TR Features
Supplied from 5V
MIC2514BM5-TR Applications
There are a lot of Microchip Technology MIC2514BM5-TR Power Switches ICs applications.
- USB Power Distribution
- Handheld Devices
- Hard Disk Drives
- Smartphone and PDA
- Portable Video Game Players
- Hot Swap
- Low Voltage I/O System Power
- Storage Drives
- Wireless/Networking Cards
- PC Card Hot Swap
