MIC2514YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IttyBitty® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.5Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2.5A |
| Base Part Number | MIC2514 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 13.5V |
| Min Supply Voltage | 3V |
| Current - Output (Max) | 1.2A |
| Nominal Supply Current | 95μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 0V |
| Number of Inputs | 1 |
| Max Input Voltage | 800mV |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~13.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Load Current | 1.9A |
| Rds On (Typ) | 950mOhm |
| Drain to Source Resistance | 1.5Ohm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2514YM5-TR Overview
The package is in the form of a Tape & Reel (TR).The SC-74A, SOT-753 package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.It belongs to the family MIC2514.In order to operate, 5 pins are used.In this case, the LED driving board can produce only 1.2AV as its maximum output.This operation requires the maximum output current to be decreased to 1.2A.In this case, it is mounted in the way of Surface Mount.There is 1.5Ohm resistance on the LED driver.Electrical components such as this are included in the IttyBitty? series.There are a total of 1 available channels.The maximum input voltage is 800mV volts.There is a minimum input voltage of 0V volts for this LED driver.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.This LED driving board can handle voltages up to 13.5VV.Supply voltages as low as 3VV are possible.The lighting driver is equipped with 1 inputs.
MIC2514YM5-TR Features
Resistance of 1.5Ohm
1 channels
MIC2514YM5-TR Applications
There are a lot of Microchip Technology MIC2514YM5-TR Power Switches ICs applications.
- Wireless Headsets
- Hot Swap
- USB Ports/Hubs
- Smartphone and PDA
- Portable GPS
- Portable/Handheld Devices
- USB Protection
- Gaming
- Low Voltage I/O System Power
- Notebook PC
