MIC2536-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 400mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 400mA |
| Base Part Number | MIC2536 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Nominal Supply Current | 60μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 130 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 400m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2536-1YM Overview
The package is in the form of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It belongs to the family MIC2536.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.It contains 2 functions.It is necessary to reduce the maximum output current to 150mA to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.The lighting driver is mounted in the direction of Surface Mount.In this case, there is 400mOhm resistance in the LED driving board.Input voltage is limited to 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
MIC2536-1YM Features
Supplied from 5V
Resistance of 400mOhm
MIC2536-1YM Applications
There are a lot of Microchip Technology MIC2536-1YM Power Switches ICs applications.
- Telecom and Network Systems
- Portable Music Players
- Portable/Handheld Devices
- Wireless Modem Data Cards
- USB Ports/Hubs
- Hard Disk Drives
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Set-top-box
- Wireless/Networking Cards
